Moisture-proof Customized Printing Food Grade PP Nutritional Supplements Packaging
Designed for convenience and freshness, our moisure-proof, child-resistant tubes are perfect for storing effervescent tablets. Made with food-grade, high-quality plastic, they protect tablets from moisture, light, and air, ensuring product stability. The cap of effervescent tube is cleverly designed, which is composed of desiccant, spiral spring and anti-theft ring. It plays different roles in protecting the safety and effectiveness of tablets. Desiccant is the standard configuration of tablet drugs. Its function is to absorb the moisture inside the bottle and keep the internal environment dry. The desiccant inside the effervescent tube is placed on the top of the bottle cap, which not only saves space, but also avoids direct contact between the desiccant and drugs.
2. Product Specification
♦Materials Quality:
| Parts | Tube Body | Cap |
| Color | Customized | Customized |
♦Specifications:
As Below show the key AQL=0.65, Main AQL=2.5, Light AQL=4.0 under the standard of GB2828.1-2012
Inspect the function and size according to the special inspection level S-3, and inspect the appearance according to the general inspection level II
| Type | No. | Item | Specifications | Inspection method | AQL Type |
| Molding | 1 | Appearance | -
Smooth surface, no obvious impurities, color particles and black spots -
Under normal distance 30cm, normal light, no black spots, impurities -
Uniform color, no mottled | Visual | Light |
| | 2 | Peculiar smell | No peculiar smell different from the material itself. Complete structure injection mold in accordance with the standard sample | Smell | Main |
| | 3 | ￠24*104 | Diameter | 24.0±1.0mm | caliper | Main |
| | | | Height | 104.0±1.0mm | Height gauge | Main |
| | | | Wall Thickness | 1.0±0.4mm | Caliper | Main |
| | 4 | ￠24 Spiral Cap | Diameter | 22.0±0.8mm | caliper | Main |
| | | | Height | 27.0±1.0mm | Height gauge | Main |
| Function | 1 | Sealing Property | Filling nominal capacity of water into the tube and tighten the cap, then Horizontally placed in the ground without leakage after 4 hours. | Visual | Main |
| | 2 | Drop Property | Filling nominal capacity of 20±5℃water into the tube and tighten the cap, then drop at 1.0m height, the bottom hits the cement flat ground, continuously dropping 3 times without rupture. | Visual | Main |
| | 3 | Thermo stability | Filling 90 degrees of hot water into tube, and cover the cap, then move to the 60 degrees thermostat. After 30 minutes, observe that the product should not be deformed or ruptured | Visual | Main |
| Print | 1 | Drawing | Color, Picture and Words same as standard sample | According to standard sample | Key |
| | 2 | Appearance | The appearance of the printed product is clean no soiling and deformity refer to standard sample | Visual | Light |
| | 3 | Peel Strength | Use 3M600tape, smooth pull up the tape at an angle of 45 degrees no large area peeled off. | Tape test | Main |
♦Storage:
keep in a cool, dry and ventilated place. Not in sunlight, rain, near the heat source, exposed to high temperature, high humidity environment (normal temperature storage, humidity > 65%)
Need to pad higher, away from the ground and wall 10cm above. no pressure.
3. Company Profile
4. Our Clients
Product Tags:
|
|
Moisture-proof Customized Printing Food Grade PP Nutritional Supplements Packaging Images
|
